MWD/LWD Engineer and Directional Driller

Versatile Experience of 8 years in multinational organizations in the various capacities.

POSITION ORGANIZATION PLACE

Directional Driller Baker Hughes Inteq Middle East & Pakistan
Jun 2008 to date

Job Description & Major Contribution
Drilled all type of directional wells including horizontal, S-shape, J-shape, long radius and blind kick off. Drilled several wells to enhance the penetration rate using the mud motor. Good command of well planning and drilling techniques in achieving the required goals.


MWD Engineer Baker Hughes Inteq Middle East & Pakistan
Dec 2006 to Jun 2008

Job Description & Major Contribution

Run MWD (Measurement While Drilling). Run probe based & collar based tools for the horizontal & deviated wells, sidetracks and for the controlled drilling measuring the orientation, temperature of the formation in the real time drilling. Serviced & maintained the unit in field, Serviced electronic & mechanical modules of probe based tools.
Worked on Baker Hughes NaviTrak and NaviGamma tools for formation correlations to pick reservoir in drilling mode.
Serviced the surface sensors and carry out all operations independently without any trouble. Run the MWD tools for survey.
Correspondence with company representative & in office, prepared the logs, ASCII files and end of well reports. Run single shot and multi shot surveys with EMS and MMT tools.

Ran Baker Hughes 6 ¾” High Speed Motor of 1.7 rev/gal for MOL in Pakistan.

Field Engineer Baker Hughes Inteq Islamabad
Aug 2002 to Dec 2006

Job Description & Major Contribution

Acquisition and interpretation of drilling data and reporting the same.
To install, operate and maintain the Advance Mud Logging system.
To maintain and service different sensors used for drilling operation, volume calculation and gases.
Correlate and interpret the geology of the adjacent area with the current well.
Preparation of master logs and pressure logs.

Qualified 2 years Master Degree program offered by Karachi University
1999 to 2001 in the field of Petroleum Technology
Qualified 2 years Bachelor Degree program offered by Karachi University
1997 to1999 in the field of Geology with major concentration on following subjects

1. Geology
2. Chemistry
3. Geography

Got Certificate of Recognition on Performance during the critical operation of kicking off the well around a fish with difficult down hole conditions for MOL Pakistan.
Got Certificate of Recognition on Teamwork and Performance by demonstrating good service quality in terms of working closely with colleagues hence boosting overall performance of the team at PPL offshore in Pakistan.
Got certificate of appreciation from BHP Billiton on Performance and Team work.
Got Certificate of Recognition on Teamwork during the critical operation of kicking off the well around a fish with difficult down hole conditions for OGDCL Pakistan.

Attended school on pressure evaluation related to the task provided by clients on formation pressure evaluation and its calculations for the prediction to increase or decrease mud weight in order to avoid kicks and losses in problem zones.



Attended training coarse on new software Advantage for providing real time data to the client and preparing drilling, pressure and master logs.




Following certified courses & Modules done with the BHP Billiton in the field of Zamzama Dadu Pakistan during the year 2002.
1. Lifting Operation & Equipments
2. Manual Handling
3. Fall & Falling Objects
4. Injuries Fingers & Hands
5. Working at the Height
6. Rigging & Lifting